GD Hans Yueming Laser Established Laser Machining Center

Laser machining center was established for bringing convenient services to laser processing enterprises. At present, there are many enterprises who need to use laser processing equipments, but with conditions of much lower utilization rate, wastefully to buy laser equipment. Han`s Yueming Laser machining center is including laser engraving machine, laser marking machine and so on,  which just the very department to solve the problem of processing.

Since the establishment of laser machine, undertake processing process, opened the window of promoting the laser processing technology and played a role model, promoted not only the economic benefit, but also the development of other industries.DG Han`s Yueming Laser derives great pleasure from servicing other enterprises.（cndgym2015）

Laser Marking Systems

Lasers marking systems out-perform conventional lasers in marking applications on metal,plastic and other surfaces.They are ideal for a wide range of marking applications including high-speed colour marking on stainless steel paint layer removal on mobile phone keypads and marking integrated circuits. 

Improved functionality: laser marking machine can be used for all types of marking applications and YAG Vanadate q-switched systems, and giving users a much wider marking capability.

Controllable: Pulse rates can be adjusted from continuous wave to single pulse and through to 500Hz repetition rate for deep marking or fast throughput thermal mark applications, at up to 200 characters per second. 

  

Accurate: Lasers’ master oscillator power amplifier architecture eliminates warm down time, so marks do not have missing starts or trailing edges.  Pulse rapid-rise and cut-off is a key feature of the Han's Yueming design.

Low cost of ownership: Fiber laser is highly efficient.  They use less energy than a conventional laser and require very little maintenance (no lamps to replace or mirrors to clean).

Optimisation of process: lasers  allow users to menu-select pulse width and waveform, and to alter the average power and repetition rate, for optimum processing conditions according to each application.

Hans yueming laser is a professional China laser marking machine manufacturer.（cndgym2015)

Tips for mirrors and lens maintenance

Mirrors and lens are very important ports of the laser machine. Hans yueming laser installs mirrors and lens made in the USA or Singapore.
Usually, the focus lens need to be cleared every three or four days.

First, take down the lens barrel . (cndgym2015）

Second, clean the focus lens with 95% alcohol with cotton sticks.

Third, dry the focus lens with cotton sticks after cleaning it. This step is very import. If the lens working with alochol, maybe it will burned. 

Hans Yueming laser is one of biggest laser machine manufacturer in China.

Hans Yueming official website: http://www.yueminglaser.com/

How to choose best suitable machine for you?

   Laser engraver can be divided into professional laser engraving machine, professional laser marking & engraving, professional laser cutting machine. Following advices maybe help to choose a laser engraver:

1) What kinds of materials will the machine engrave:Generally, laser engraving machine can be divide into two kinds: YAG and CO2. The first one is special designed for metals engraving, the second one is for non-metal materials, which occupies a larger parts in the engraving market.（cndgym2015)

2) What kinds of application you want to get:
Laser engraving equipments including laser engraver, laser cutter, and laser marking machine. According to different application, some equipments are multifunctional while some are special engravers just for one function.

3) How large the engraved area is:

When selecting laser engraving machine, the material’s area is one influence factor. Most users select the most compatible working area. The best one is the most suitable but not the largest one. We have many models for the customer to choose,

40cm*30cm, 60cm*40cm, 90cm*60cm, 100cm*60cm, 120cm*80cm, 120cm*90cm, 140cm*90cm,130cm*120cm, 130cm*180cm, 130cm*250cm, 150cm*250cm, 160cm*210cm,150cm*300cm.

Of course, we can produce the other models, but it will take longer time.

4) Laser tube power:
laser tube power will be different according to the engraved materials.

Benefits of our lasers:
CO2 Glass or R.F. Lasers –The laser tube we chose are most water cooled. Laser tubes can be easily removed or changed by the users. Usually, the glass tubes are not expensive and easy to get.

We can also equip R.F. lasers imported from USA and other countries and cooled by air according to your requirement.
Lasers Designed Specifically for Engraving & Cutting – Laser tubes are made in China or imported with high quality and specifically tuned to provide fine cutting and engraving quality.
Power Range Availability (25-800w watts) – Get the exact amount of power you need for virtually any application.

5) How much power do I need?
25-40 Watts –It is special for stamp carving and simple engraving and thin material cutting, not recommended for thick cutting or dual head applications.
40-60 Watts –Medium production power level for deeper, high speed engraving and slightly thick cutting operations.
60-80 Watts –High production power level provides increased throughput, deep engraving and cutting.

100-180 Watts – Very high production power level that is ideal for heavy cutting and deep, higher throughput engraving. For example, if you want to cut acrylic of thickness of over 2cm (Include 2cm) or other thick material; you can choose high power lasers.

200 Watt – GSI, Imported from UK. It can cut at most 3mm iron and thick non-metals. It is very suitable for thin materials cutting.

500Watt – YAG. It can cut at most 8mm iron. Anyway, it can cut brass, aluminum, stainless steel, titanium and so on.

6) Speed:
More profit can be realize in short time with high working speed. So speed is the important factor on whether you can get the orders and get the profits.

7) Series service:
Pre-sales service: we will provide you the professional, prompt, patient, pre-considering service to help you find the most suitable equipment

After sale service: after receiving the order, we will provide you with equipments following service, to get the shipping pictures for you. Usually, the after sales-service of equipment is very important. We provide free on-line technical support and free maintenance of the spare parts within guarantee period.

Extra fee is paid if out of date. Any damage to the machine caused by improper use will be charged.

8) General to consider the quality and cost:
Not all laser engraving machines are the same quality or are composed of the same materials. Depending on the different equipment the quality of engraving machines can vary greatly. For this reason, cheaper engraving machines are not always the best ones for you, only machines with reasonable price and accord with your application are your best choice.

9) Other features:
Apart from above mentioned features, there are a couple of other things to remember when choosing engraving machines. Good mechanical design is also important for you; it makes your working more stable and convenient. Some optical device can extend machine’s application. Your detailed information will be helpful for us to suggest the best suitable laser engravers to you.

Hans Yueming laser is one of biggest laser equipment manufacturer.

Hans Yueming official website: http://www.yueminglaser.com/

Yueming Laser Products are authorized for Adoption of Standa

The Adoption of International Standards and Advanced Oversea Standards (shortened form: adoption of standards) refers to transform the international standards and advanced oversea standards into the standards of China (including national standards, industrial standards, local standards, enterprise standards) in different degrees after analyzing and studying. Then these standards shall be implemented after being approved by quality and technical departments above provincial level. International standards indicate the standards established by International Organization for Standardization (ISO) and International Electronic technical Commission (IEC), as well as ISO-approved and issued product making and quality testing standards established by other international organizations. Advanced oversea standards refer to ISO-approved and issued standards established by other international organizations, developed countries, regional organizations, authoritative organizations and enterprises (companies). Regional organizations include: European Committee for Standardization (CEN), European Committee for Electrotechnical Standardization（CENELEC）and European Broadcasting Union (EBU).
In recent years, global economic integration has been accelerated and product exportation of China has increased rapidly. However, export enterprises and products of China encounter more and more resistance on technical regulations, standards, and qualified procedures assessing procedures. Enterprises’ adoption of standards, through international mutual authentification system and international certification localization, accelerate the enterprises to improve technical competitiveness and surpass oversea technical resistance better and achieve sustainable increase of foreign trade business. Recently, the provincial and municipal technical supervision department assisted Yueming Laser products’ standard adoption in being authorized, which is the first case in laser processing equipment industry of China. The adoption of standards cover all the products of Yueming Laser. Provincial and municipal technical supervision department checked and approved the adoption of standards according to national industrial policies and requirements of Standardization Administration of the People’s Republic of China. Actually, adopting international standards and advanced oversea standards is an important technical economic policy of China and an important part of technical introduction. Via products standard adoption, follow up international standardization development and according to the secretariat work of ISO and IEC, we attempt to transform the standard proposals into international standards.

Yueming Laser’s technical patentization, from patent to standard, is not only an upgrade of management, but also a formidable weapon for success in market competition. Technical patentization, patent standardization and standard internationalization are the true significance for standard adoption of Yueming Laser. Approved by Guangdong Bureau of Quality and Technical Supervision, Yueming Laser has completely implemented the adoption of standards since June, 4^th, and all the product standards will be upgraded automatically, which will be more beneficial for the products to participate in international market competition. 

Hans yueming laser specializes in developing, manufacturing and selling of industrial laser equipments, includinglaser cutting machine, laser engraving machine, laser marking machine, etc. We will offer you the latest laser technology news to you, please pay attention to our official website : http://www.yueminglaser.com/ .  (cndgym2015）

OPEN A NEW AREA FOR APPLICATION OF LASER INDUSTRY

---- An interview with Zuo Jingsong, General Manage of Guangdong Yueming Laser Group 
In March in the South, flowers are in full blossom in the beautiful spring. Sino-corrugated Exhibition was held in Shanghai New International Expo Center in March 28^th. Entering the exhibition hall, the first person the reporter met was Zuo Jingsong, General Manage of Guangdong Yueming Laser Group (hereinafter referred to as “Yueming”. The reporter remembered that on the reed exhibition two years ago, it was Zuo Jingsong who first had an interview with him. As he is doing a brisk business, Zuo Jingsong’s face is full of smiles when meeting the old friend. Brisk Business 
According to Zuo Jingsong, before 2005, Yueming developed steadily. From 2006, Yueming has expanded fast. 
    Firstly, Yueming has expanded its business into the application of laser products to procure new business opportunities for  laser technology. Secondly, Yueming has expanded its laser products. Yueming started from manufacture of engraving machines, then it succeeded in developing cutting machines and marking machines. 
In the past, our product could only process rubber plates. But now, die cutting plates can be processed. At the end of this year, Yueming will launch laser welder, laser heat-treatment machine, etc. and try to make them systematized in short time. In the past, Yueming could only produce laser equipment with nominated power of no more than 100W and the weight of about 200kg. Recently, Yueming has made major adjustment to the product structure. Now, it can produce laser equipment with the maximum power of 2500 W and the weight of more than 5 tons. 
Yueming has been advancing with the times. The Pearl River Delta is located in the forward position of reform and opening-up. At the beginning of this century, Yueming began its business and expanded in Dongguan, Guangdong. Then it established Shanghai Dinghong Laser Machine Co., Ltd and Shanghai Huming Laser Technology Co., Ltd in the Yangtze River Delta. Now Jiangsu Dinghong Laser Share Co., Ltd has been set up in Xuzhou as Bohai Sea Economic Zone and Northeastern China Zone are flourishing. 
User First 
 Recently, an appropriate layout of outlets for after-sale service (hereinafter referred to as “outlet”) has been achieved. Now, there are 5 outlets respectively in Guangdong, Zhejiang and Jiangsu. And there is one respectively in Shenyang, Tianjin and Qingdao. 
In the past, it took a long way to provide after-sale service. Once the warranty expires, the user has to pay for the service fee. Now, with more outlets, it’s more convenient and cheaper for users to obtain service. For example, in the past, a user in Shenyang had to pay 600-700 RMB for repairing a machine; now, it only takes 100-200 yuan. 
Also, Yueming has tried to reduce the prices of components as much as possible. For example, in the past, it provided a laser diode at the price of 2000 yuan per piece; last year, the price was cut to 1500 yuan per piece; this year, the price is only 1000 yuan per piece, equivalent to the result of cost plus 10% of attrition.
Though many imported components are used, the prices of Yueming equipment are competitive in the domestic market. This is due to mass production. The output of Yueming in 2006 was 300 sets per month. This year, the figure has increased to 500 sets per month. Additionally, Yueming can get components at low prices by bulk purchase. This is one of the important reasons why Yueming can cut cost and maintain the competitive advantage. 
Making Friends
  In the past, many components of Yueming laser processing machine were developed by the Company. They have contributed a lot to the development of the Company. However, there is certain gaps between China and the developed countries in terms of technology level. Therefore, recently, Yueming has actively carried out cooperation with similar companies in Italy and Japan, so as to introduce advanced technology and management philosophy to make big progress in product quality. 
Foreign experts take affairs seriously. Sometimes, they are even described as “stiff”. They will stick to principles without any change. We should learn this from them. 
Language problems caused difficulties even misunderstanding in communication. It was easier to communicate with experts from Italy, as they knew English. It was very difficult to communicate with experts from Japan. Two parts could only have simple communication through Chinese characters. So, the Company employed two Japanese interpreters. At the beginning, foreign merchants were worried that the Company will not abide by “Game Rules”. However, “it takes time to know a person”. After contact for a period of time, mutual trust was finally established. Over the five years, the Company has had good cooperation with the foreigners and made deep friendship with them. 
In face of globalization, Zuo Jingsong is planning to employ some foreign managers who are good at management, so as to build Yueming as an outer-oriented enterprise. 
 Establishment of New Factories 
Jiangsu Dinghong (hereinafter referred to as “Dinghong”) is a joint stock enterprise of Yueming and foreign merchant. It was started in 2005 and put into production in April, 2006. As a hi-tech enterprise, it is one item of the Jiangsu Major Foreign Investment Project. 
The new factory covers an area of 120 mu, surrounded by mountain and water, with a beautiful view. The total investment of the project is RMB 120,000,000 yuan, which will be paid off in two phases. In the first phase, RMB 70,000,000 yuan will be invested for acquirement of land, capital construction and procurement of equipment. Presently, the new factory is being constructed. It is estimated that the engineering will be completed in June this year. In order to attract talents, 10 villas for experts, each of which has an area of 250—280 m², will be set up in a corner of the factory premises.  Zuo Jingsong stated that building a factory in the northern part of Jiangsu is also to promote the economic development of his hometown. It can not only increase the local GDP, but also provide jobs to benefit his hometown folks. When the reporter asked why the factory covered such a large area, Zuo Jingsong said: “Large area is needed for production.” Industrial laser equipment can be very large and some will have a total length of 17m. In the future, the Company will produce steel plate cutters for auto manufacture and oil pipe processing. A small area is not adequate for mass pre-production and effect handling.
Knockout Product 
DH-1812 Identical Light Route Laser Cutter for mould cutting in the packaging industry, shown in the exhibition, is the knockout product of Dinghong. It sells well since it was born. The Company has received a lot of orders for this machine for the period from now to the end of June.  This kind of machine is designed for mould cutting processing. Stability of body, flexibility of executive mechanism, and special software for laser cutting affiliate cutting. Its efficiency and quality are much better than traditional cutters. And it can continuously work 24 hours a day.

   This kind of machine is designed by the principle of “constant light path”. The cutting efficiency will not be affected by the distance of light path. So the cutting gaps are ensured to be even. And light calibration and maintenance can be convenient. This machine is equipped with high-power laser fast axial CO₂ laser of world-famous brand. The output laser beams are processed and transmitted by outer light path, then focused by the cutting head and then blown by cut assist air. In this way, moved by CNC machine, the machine can cut various metal or non metallic plates.

  The control software operates with the Windows Operating System, with the functions of CAD/CAM auto programming and optimizing suit cutting layout. It can recognize different CAD drawing files. For the purpose of convenience, users can establish their own database of laser cutting process in the system. So that they can choose an appropriate processing program directly from the database. Essential components such as CNC system, servo motor and its driver, precision linear rolling guideway, ball screw, optical glasses are imported ones. This machine is also equipped with dual-temperature cooling water system. And other auxiliary equipment such as controlled power supply, oil-free air compressor, cooling and drying machine and fume extraction and vacuum device is optional.

  Human Based

  There are four principles in Yueming’s philosophy on human resource: Firstly, to retain talents by cause, i.e. an enterprise should show the promising prospect to the job applicants; secondly, to retain talents by incentive mechanism, i.e. an enterprise should make career plans for job applicants and provide opportunities for promotion and rise in salary by “option incentive mechanism”; thirdly, to retain talents by affection, i.e. an enterprise should instill employees by reason and implement administration according to regulations; Finally, to retain talents by salary, i.e. the income distribution system in an enterprise should embody the principle of “ distribution according to labor”.

  Zuo Jingsong said that the Company was much concerned with the life of employees and its affection for employees was embodied in every particular of the operation of the Company. For example, the fees for travel to and from employees’ hometowns during the Spring Festival will be reimbursed. For employees whose hometowns are very far away, plan ticket fees will be reimbursed. Its employees can also enjoy paid holidays during the Spring Festival.

   Expanding Export

    According to Zuo Jingsong, presently, in domestic laser equipment industry, competition of low-level products is furiousand disorderly; competition of high-level products is relatively less severe. As the threshold of technology and capital for Dinghong products is high, Dinghong has not met any rival yet. 

    In order to meet the requirements of the increase in sales and the expanding of sales area, Yueming is making efforts to set up a large and highly skillful marketing team, which comprises personnel from different countries. For example, to carry out marketing in Europe and America, Yueming employed local people as agents, as they were familiar with the local living habits, customs and market conditions and did not have any language problems. 

  For years, the market share of medium and small-sized equipment produced by Yueming ranks high in China. These products are sold to all parts of the world, including Iraq, Iran andSyria in Middle East as well as some developed countries such as America, Britain, Italy,Japan and Korea. Yueming will dispatch technicians to work in the countries where its products sell well. So, Yueming has received recognition in the world for high quality of its products and services. 

   Yueming is now a group owning 4 subsidiaries (Yueming, Huming, Shanghai Dinghong and Jiangsu Dinghong) with over 600 staff members. In 2006, the export amount represented 40% of the total turnover. And this figure is estimated to over 50% this year.

   According to Zuo Jingsong, Yueming Laser is determined and confident to become the largest enterprise in the domestic industry of laser equipment with the highest technology content. 

Hans yueming official website: http://www.yueminglaser.com/. （cndgym2015）

Profile of Enterprise Shown at International Printing Techno

The 24^th International Printing Technology Exhibition was held in The Guangdong Modern International Exhibition Center (Dongguan) from April 10^th to 14^th in 2007. This exhibition was held at the same place and the same time as Print China 2007, which commanded the attention of the world. It was a large scale exhibition in which a lot of enterprises took part, including many top and professional laser cutting machine manufacturers. The 100 top printing enterprises strove to play a major role in it. It was the largest international printing technology exhibition in Southern China in 2007.

The Pearl River Delta is the most developed area for printing technology. As a world-famous manufacturing city between Guangzhou and Shenzhen, Dongguan has the most advanced printing technology and the market demand of such technology is enormous. Therefore, it benefits from good opportunity, favorable location and support from people. At the invitation of PRINTING AND PRINTING EQUIPMENT INDUSTRIES ASSOCIATION OF CHINA, Yueming Laser Technology Co., Ltd actively took part in the exhibition and introduced products which attracted many manufacturers. While Purchase Contracts for only dozens of equipment sets were signed, European Screenprinting Manufacturers Association (ESMA), Korea Screen Grapic Imaging Association （KSGIA）, Screenprinting & Graphics Association of India (SGAI) and some Japanese friends visited the booth of Yueming and learned information about performance and prices of its products. Additionally, over 100 factory representatives visited the base of Yueming Laser in Dongguan.  （cndgym2015)

 Yueming Laser is famous in the industry of packing and printing. Most notably, the laser processing machinery, developed by Yueming for the industry of packing and printing, can provide complete engraving and mould cutting technical programs for the industry of packing and printing. As well, it made “The Top 50 in China’s Packing Machinery” list. Marching towards international markets through international exhibitions has long been the pursuit of Yueming. What Yueming Laser obtained  through this exhibition was not only purchase orders, but also the opportunity to show the profile of the Company and make domestic and international friends as well as develop the potential market and clients! Please pay attention to Hans yueming official website: http://www.yueminglaser.com. We will offer the new laser technology industry news to you.